<HTML>
<HEAD>
<TITLE>Re: [Paraview] trouble reading in netCDF file</TITLE>
</HEAD>
<BODY>
<FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'>It looks like the streamlines filter only accepts point data and the data on the mesh is cell data. You can get around that by running the Point Data to Cell Data filter, although this seems like an odd restriction on the streamlines filter and you might want to add a feature request to the ParaView bug tracker if this is an issue.<BR>
<BR>
-Ken<BR>
<BR>
<BR>
On 5/19/10 9:30 AM, "Joel Culina" <<a href="joel.culina@acadiau.ca">joel.culina@acadiau.ca</a>> wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'><BR>
<BR>
Good call! I just need streamlines now, but the streamline filter is 'ghosted out'. How do you get streamlines for my unstructured grid, unsteady data (i.e., I need streamlines at a fixed point in time)?<BR>
<BR>
thanks<BR>
Joel<BR>
<BR>
p.s. I'm getting people here converted to paraview!<BR>
<BR>
<BR>
-----Original Message-----<BR>
From: Moreland, Kenneth [<a href="mailto:kmorel@sandia.gov">mailto:kmorel@sandia.gov</a>]<BR>
Sent: Wed 5/19/2010 9:51 AM<BR>
To: Joel Culina<BR>
Subject: Re: [Paraview] trouble reading in netCDF file<BR>
<BR>
Are you sure that the data isn't simply flat? It looks like the mesh extends on the order of 100,000 units in the x and y direction, and only about 150 units in the height direction. What happens if you apply the transform filter and scale the z by, say, 1000?<BR>
<BR>
-Ken<BR>
<BR>
<BR>
On 5/18/10 3:58 PM, "Joel Culina" <<a href="joel.culina@acadiau.ca">joel.culina@acadiau.ca</a>> wrote:<BR>
<BR>
Hi Ken,<BR>
<BR>
I am now able to load FVCOM model (oceanographic) netCDF data into paraview by enabling Visit plug-ins (there exists a Visit plug-in for reading in FVCOM model data).<BR>
<BR>
However, it plots variables that are functions of 3 spatial variables (in x, y and h) over 2D space (over x and y). (Yet the horizontal coordinates x and y and the height h are all listed as 'variables' variables as opposed to 'dimensions' variables.) How using the appropriate filters can I derive 3D images; e.g. scalar fields over x, y and h? Ultimately I wish to draw streamlines in 3D.<BR>
<BR>
I've attached a small FVCOM file (2 time steps with 3D data). In order to properly load this particular file, I had to run the following line of script:<BR>
upper1_0001_nc = VisItNETCDFDatabaseBridge( FileName='/array/home/jculina/Desktop/ParaView-3.8.0-RC1-Linux-x86_64/my_data/upper1_0001.nc' )<BR>
For some reason, it automatically reads SOME FVCOM files using the visit plug-in, but other FVCOM files (with similar names and .nc extension and visit plugins enabled), it reads in the files as netcdf files.<BR>
<BR>
thanks alot!<BR>
Joel<BR>
<BR>
-----Original Message-----<BR>
From: Moreland, Kenneth [<a href="mailto:kmorel@sandia.gov">mailto:kmorel@sandia.gov</a>]<BR>
Sent: Wed 4/7/2010 11:09 AM<BR>
To: Joel Culina; <a href="paraview@paraview.org">paraview@paraview.org</a><BR>
Subject: Re: [Paraview] trouble reading in netCDF file<BR>
<BR>
The netCDF reader in version understands the COARDS convention (a common subset of CF). It sounds like the variable annotation you describe should be supported. However, one major limitation of the netCDF reader is that it only supports reading variables of the same dimensions because it puts them all on the same grid. So if you have selected to load variables with different dimensions, it will use the dimensions of the first variable and fail to load the rest. That would explain the behavior you are getting since most netCDF files I have run into seem to have variables with low dimension listed first. (There is no particular reason for this. It just seems to be what people/applications do.) If this is the case, you are probably also getting a lot of warnings from the netCDF reader about it and the Information panel will be missing many of your variables. Try turning off all variables in the Object Inspector and turning on only one variable you are interested in.<BR>
<BR>
If this is the problem, it should go away in version 3.8. Realizing this the 3.6 interface to the netCDF reader really sucks, I changed it to select dimensions instead of variables. All variables conforming to the selected dimensions are loaded. It makes using the netCDF reader much easier and problems like the one I described go away. I also expanded the reader to understand most of the CF convention.<BR>
<BR>
Unfortunately, don't use the CVS for this just yet. I have recently discovered that a new netCDF reader that was apparently built for a specific use case but seems to screw up on most data was added to ParaView and it is overriding the existing netCDF reader. We are trying to work on a resolution.<BR>
<BR>
-Ken<BR>
<BR>
<BR>
On 4/6/10 6:02 PM, "Joel Culina" <<a href="joel.culina@acadiau.ca">joel.culina@acadiau.ca</a>> wrote:<BR>
<BR>
Hi,<BR>
<BR>
Thank you Ken for responding.<BR>
<BR>
I suspect that your diagnosis is correct; the root of the problem, I believe, is that I am reading in netCDF data that follows the CF convention. In particular, the grid is an unstructured triangular 2D grid ('poly data' grid in the venacular of paraview). The 'dimensions' variables include integer identifiers for triangle nodes, but NOT lat, long, x, y, time etc. Rather, these are included among the 'variables' variables (e.g. lat = lat(node)).<BR>
<BR>
Is the problem indeed that the paraview netCDF reader cannot understand this particular netCDF-CF file? Is there a way around this, without having to change the way the data is outputted (from netCDF-CF to netCDF-COARDS convention)? Note that I can read into paraview certain variables by filtering out the 1-dimensional variables (lat, long etc.), but of course these variables do not have the correct dependencies (they should be dependent on the variables I filtered out - lat, long etc.)<BR>
<BR>
thanks,<BR>
Joel<BR>
<BR>
<BR>
<BR>
-----Original Message-----<BR>
From: Moreland, Kenneth [<a href="mailto:kmorel@sandia.gov">mailto:kmorel@sandia.gov</a>]<BR>
Sent: Tue 4/6/2010 3:41 PM<BR>
To: Joel Culina; <a href="paraview@paraview.org">paraview@paraview.org</a><BR>
Subject: Re: [Paraview] trouble reading in netCDF file<BR>
<BR>
It sounds like you are reading in an array with 0 or 1 dimensions (not including time). Although the reader should happily create an image data of that structure, the standard rendering views only understand image data of 2 or 3 dimensions. Hence you get the error.<BR>
<BR>
If you want to see the data in a plot, try adding the "Plot Data" filter.<BR>
<BR>
-Ken<BR>
<BR>
<BR>
On 4/6/10 11:36 AM, "Joel Culina" <<a href="joel.culina@acadiau.ca">joel.culina@acadiau.ca</a>> wrote:<BR>
<BR>
<BR>
<BR>
Hi,<BR>
<BR>
I am trying to read in a netCDF file using Paraview 3.6.2. It can 'see' the netCDF file, but when I attempt to read in the file by pressing 'Apply', I get the following error message:<BR>
<BR>
ERROR: In /home/kitware/ParaView3/Utilities/BuildScripts/ParaView-3.6/ParaView3/Servers/Filters/vtkTexturePainter.cxx, line 280<BR>
vtkTexturePainter (0xb8a0000): Incorrect dimensionality.<BR>
<BR>
I'm not sure which netCDF release created the netCDF file. However, I read in a previous post that paraview 3.6.1 could handle netCDF 4, and since "all netCDF files ever written can always be read by the latest netCDF release. That is, we guarantee backward data compatibility" then 3.6.2 should be able to handle my netCDF file (which wasn't created too recently).<BR>
<BR>
I can read the netCDF file into MATLAB, so it isn't corrupt.<BR>
<BR>
So what's the problem?<BR>
<BR>
thanks<BR>
Joel<BR>
<BR>
<BR>
<BR>
**** Kenneth Moreland<BR>
*** Sandia National Laboratories<BR>
***********<BR>
*** *** *** email: <a href="kmorel@sandia.gov">kmorel@sandia.gov</a><BR>
** *** ** phone: (505) 844-8919<BR>
*** web: <a href="http://www.cs.unm.edu/~kmorel">http://www.cs.unm.edu/~kmorel</a><BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
**** Kenneth Moreland<BR>
*** Sandia National Laboratories<BR>
***********<BR>
*** *** *** email: <a href="kmorel@sandia.gov">kmorel@sandia.gov</a><BR>
** *** ** phone: (505) 844-8919<BR>
*** web: <a href="http://www.cs.unm.edu/~kmorel">http://www.cs.unm.edu/~kmorel</a><BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
**** Kenneth Moreland<BR>
*** Sandia National Laboratories<BR>
***********<BR>
*** *** *** email: <a href="kmorel@sandia.gov">kmorel@sandia.gov</a><BR>
** *** ** phone: (505) 844-8919<BR>
*** web: <a href="http://www.cs.unm.edu/~kmorel">http://www.cs.unm.edu/~kmorel</a><BR>
<BR>
<BR>
<BR>
</SPAN></FONT></BLOCKQUOTE><FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'><BR>
</SPAN></FONT><FONT SIZE="2"><FONT FACE="Consolas, Courier New, Courier"><SPAN STYLE='font-size:10pt'><BR>
**** Kenneth Moreland<BR>
*** Sandia National Laboratories<BR>
*********** <BR>
*** *** *** email: <a href="kmorel@sandia.gov">kmorel@sandia.gov</a><BR>
** *** ** phone: (505) 844-8919<BR>
*** web: <a href="http://www.cs.unm.edu/~kmorel">http://www.cs.unm.edu/~kmorel</a><BR>
</SPAN></FONT></FONT><FONT FACE="Calibri, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'><BR>
</SPAN></FONT>
</BODY>
</HTML>