|
|
(9 intermediate revisions by 4 users not shown) |
Line 1: |
Line 1: |
| =Introduction= | | =Introduction= |
|
| |
|
| '''<font color="green">This page has been updated for ParaView 5.3. This page is applicable for ParaView 3.98 and above. For ParaView 3.14.1 and earlier versions, refer to the [http://paraview.org/Wiki/index.php?title=ParaView:Build_And_Install&oldid=46445 past version] of this document.</font>''' | | '''<font color="red">This page has been replaced by [https://gitlab.kitware.com/paraview/paraview/blob/master/Documentation/dev/build.md build documentation in the paraview repository]. |
| | |
| This page describes how to build and install ParaView. It covers both the released and the development versions, both Unix-type systems (Linux, HP-UX, Solaris, Mac), as well as Windows.
| |
| | |
| ParaView depends on several open source tools and libraries such as Python, Qt, CGNS, HDF5, etc. Some of these are included in the ParaView source itself (e.g. HDF5), while others are expected to be present on the machine on which ParaView is being built (e.g. Python, Qt, CGNS). Based on whether you want to build ParaView along with all the external tools it needs or you want to build the external tools yourself (or use versions already available on your system), there are two ways to build ParaView from source.
| |
| # To build ParaView complete with all the dependencies it needs, use the [https://gitlab.kitware.com/paraview/paraview-superbuild ParaView Super-Build] instructions.
| |
| # To build ParaView source itself by providing existing installations/builds of the external dependencies, typical for plugin developers and users, use the instructions on this page.
| |
| | |
| =Prerequisites=
| |
| | |
| *The ParaView build process requires [http://www.cmake.org CMake] version 3.3 or higher and a working compiler. On Unix-like operating systems, it also requires Make, while on Windows it requires Visual Studio (2008 prior is supported, though 2013 or 2015 is recommended).
| |
| | |
| *Building ParaView's user interface requires [https://www.qt.io/ Qt], at least version 5.6.*. To compile ParaView, either the LGPL or commercial versions of Qt may be used.
| |
| | |
| ParaView can still be built with Qt4, though it is not recommended. In this case, it needs version 4.7.* ([http://download.qt.io/archive/qt/4.8/ 4.8.*] is recommended). To compile ParaView, either the LGPL or commercial versions of Qt may be used. Also note that on Windows you need to use VisualStudio 2008 or 2010+SP1 as Qt v4.8.* don't come with VS2012 or VS2013 builds.
| |
| | |
| *In order to run ParaView in parallel, MPI [http://www.mpich.org/downloads/] ([https://msdn.microsoft.com/en-us/library/bb524831(v=vs.85).aspx] for windows) is also required.
| |
| | |
| *In order to use scripting, Python is required (version 2.7.13 is known to work, as well as python 3.6. Make sure to install the right version for your compiler) [http://www.python.org].
| |
| | |
| * Also note, for Windows builds, unix-like environments such as Cygwin, MinGW are '''not''' supported.
| |
| | |
| ==Download And Install CMake==
| |
| | |
| CMake is a tool that makes cross-platform building simple. On several systems it will probably be already installed. If it is not, please use the following instructions to install it. If CMake does not exist on the system nor in the package management of your system, and there are no pre-compiled binaries, use the instructions below on how to build it. Use the most recent source or binary version of CMake from the CMake web site.
| |
| | |
| ===Using Binaries===
| |
| | |
| There are several precompiled binaries available at the [http://www.cmake.org/cmake/resources/software.html CMake download page].
| |
| | |
| {| cellspacing="3"
| |
| |- valign="top"
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #ffc9c9; color: #000; background-color: #fff3f3"|
| |
| <div style="padding: .4em .9em .9em">
| |
| ====On Unix-like operating systems====
| |
| Let's say on Linux, download the appropriate version and follow these instructions:
| |
| | |
| * Download: http://www.cmake.org/files/v2.8/cmake-2.8.8-Linux-i386.tar.gz
| |
| | |
| <pre>
| |
| cd $HOME
| |
| wget http://www.cmake.org/files/v2.8/cmake-2.8.8-Linux-i386.tar.gz
| |
| mkdir software
| |
| cd software
| |
| tar xvfz ../cmake-2.8.8-Linux-i386.tar.gz
| |
| </pre>
| |
| | |
| * Now you have the directory '''$HOME/software/cmake-2.8.8-Linux-i386/bin''', and inside there are executables '''cmake''' and '''ccmake'''.
| |
| * You can also install CMake in the '''/usr/local''' or '''/opt''' by untaring and copying sub-directories. The rest of the instructions will assume the executables are in your '''$PATH'''.
| |
| | |
| </div>
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #c6c9ff; color: #000; background-color: #f0f0ff"|
| |
| <div style="clear: right; text-align: left; padding: .4em .9em .9em">
| |
| ====On Windows====
| |
| * Download the installer: http://www.cmake.org/files/v2.8/cmake-2.8.8-win32-x86.exe
| |
| * Follow the installation instructions
| |
| | |
| ====On Windows, if you are not administrator====
| |
| * Download: http://www.cmake.org/files/v2.8/cmake-2.8.8-win32-x86.zip
| |
| * Uncompress into some directory
| |
| * Optional: create a shortcut on the desktop.
| |
| </div>
| |
| |}
| |
| | |
| ===Build Your Own CMake===
| |
| | |
| {| cellspacing="3"
| |
| |- valign="top"
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #ffc9c9; color: #000; background-color: #fff3f3"|
| |
| <div style="padding: .4em .9em .9em">
| |
| ====On Unix-like operating systems====
| |
| Download the source code: http://www.cmake.org/files/v2.8/cmake-2.8.8.tar.gz
| |
| | |
| <pre>
| |
| cd $HOME
| |
| wget http://www.cmake.org/files/v2.8/cmake-2.8.8.tar.gz
| |
| tar xvfz cmake-2.8.8.tar.gz
| |
| cd cmake-2.8.8
| |
| ./configure --prefix=$HOME/software
| |
| make
| |
| make install
| |
| </pre>
| |
| | |
| * Again, you can install it in '''/usr/local''' or '''/opt''' by changing the prefix.
| |
| </div>
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #c6c9ff; color: #000; background-color: #f0f0ff"|
| |
| <div style="clear: right; text-align: left; float: right; padding: .4em .9em .9em">
| |
| ====On Windows====
| |
| To build CMake on windows, a previous version of CMake is required. This can be downloaded from the Cmake download page: [http://www.cmake.org/HTML/Download.html].
| |
| | |
| </div>
| |
| |}
| |
| | |
| ==Download And Install Qt==
| |
| | |
| ParaView uses Qt as its GUI library. Qt is required whenever the ParaView client is built.
| |
| *As stated above, the LGPL of Qt can be found at [https://www.qt.io/download-open-source/#section-2].
| |
| **The recommended way to install Qt on Linux is by using the Qt5 package of your distribution if it is at least of version 5.6.
| |
| **In other case it is possible to, by order of recommandation :
| |
| ***Install a Qt binary package. Use the latest stable version of qt-PLATFORM-opensource-VERSION.[tar.gz or zip or dmg]. If this gives you trouble, version 5.6.2 is known to work. When downloading binaries, ensure that your compiler version matches the Qt compiler indicated. On Windows, make sure to use the build corresponding to your system and version of visual studio.
| |
| ***Build from source. Use the latest stable version of qt-everywhere-opensource-src-VERSION.[tar.gz or zip or dmg]. If this gives you trouble, version 5.6.2 is known to work.
| |
| | |
| ==Download And Install ffmpeg (.avi) movie libraries==
| |
| | |
| When the ability to write .avi files is desired, and writing these files is not supported by the OS, ParaView can attach to an ffmpeg library. This is generally true for Linux. Ffmpeg library source code is found here: [http://www.ffmpeg.org/]
| |
| | |
| ==Download And Install MESA 3D libraries==
| |
| | |
| ParaView uses the OpenGL graphics drivers and card from a user's workstation. When you want to run ParaView's servers on a platform that does not include hardware OpenGL support, you must use MESA to emulate this hardware in software. Mesa is open source, and it can be downloaded from here: [http://www.mesa3d.org/].
| |
| | |
| There is a known problem with MESA version 7.8.2 and ParaView. This has been reported to the MESA team. Version 7.7.1 has been tested and seems to work correctly as well as 7.9.
| |
| | |
| Build as follows:
| |
| *make realclean
| |
| *make TARGET (for instance, make linux-x86-64)
| |
| | |
| Note - some platforms will complain during ParaView compiles about needing fPIC. In the configs directory, copy your platform file to another custom file, edit it, and add -fPIC to the compile lines. For instance, cp linux-x86-64 linux-x86-64-fPIC.
| |
| | |
| For more elaborate discussion on building with Mesa/OSMesa support, refer to [[ParaView And Mesa_3D]].
| |
| | |
| ==Download ParaView Source Code==
| |
| | |
| If you are trying to build a ParaView release, download it from the release page. For the development version, please follow the instructions below for checking it out from git.
| |
| | |
| ===Download The Release===
| |
| | |
| Don't forget that you can always just download the binaries from the [http://paraview.org/paraview/resources/software.php ParaView download page]. This page contains binaries for several platforms and the source code for the releases.
| |
| | |
| ====Note: debian build====
| |
| | |
| List of packages to build ParaView on Debian:
| |
| | |
| libphonon-dev libphonon4 qt4-dev-tools libqt4-core libqt4-gui qt4-qmake libxt-dev g++ gcc cmake-curses-gui libqt4-opengl-dev mesa-common-dev
| |
| | |
| With MPI (using openmpi, you can use any other flavour):
| |
| | |
| openmpi-common openmpi-bin libopenmpi-dev
| |
| | |
| With Python:
| |
| | |
| python-dev
| |
| | |
| ===Checkout Development Version from git===
| |
| Note that you may need to download and install a git client, here: [http://git-scm.com/]
| |
| | |
| {| cellspacing="3"
| |
| |- valign="top"
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #ffc9c9; color: #000; background-color: #fff3f3"|
| |
| <div style="padding: .4em .9em .9em">
| |
| ====On Unix-like operating systems====
| |
| <pre>
| |
| To download the source code
| |
| # git clone https://gitlab.kitware.com/paraview/paraview.git
| |
| # cd paraview
| |
| # git submodule update --init
| |
| | |
| To update the code
| |
| # git pull
| |
| # git submodule update
| |
| | |
| </pre>
| |
| </div>
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #c6c9ff; color: #000; background-color: #f0f0ff"|
| |
| <div style="clear: right; text-align: left; float: right; padding: .4em .9em .9em">
| |
| | |
| ====On Windows====
| |
| We recommend [https://git-for-windows.github.io/ git for windows]. git for windows provides a git bash that has the appropriate environment set up for using git and it's tools. You will then be able to use git the same way is in the linux part.
| |
| </div>
| |
| |}
| |
| | |
| ==Configure ParaView With CMake==
| |
| * Always use a <font color="red">'''separate build directory'''</font>. Do not build in the source directory.
| |
| | |
| {| cellspacing="3"
| |
| |- valign="top"
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #ffc9c9; color: #000; background-color: #fff3f3"|
| |
| <div style="padding: .4em .9em .9em">
| |
| ===On Unix-like systems===
| |
| * Use ccmake (Curses CMake GUI) from the CMake installed location. CCMake is a Curses based GUI for CMake. To run it go to the build directory and specify as an argument the src directory.
| |
| | |
| <pre>
| |
| cd ../
| |
| mkdir paraview_build
| |
| cd paraview_build
| |
| | |
| ccmake ../paraview
| |
| </pre>
| |
| [[Image:Brpv ccmake.png|400px]]
| |
| | |
| ===About CCMake (Curses CMake GUI)===
| |
| | |
| * Iterative process.
| |
| ** Select values, run configure (c key).
| |
| ** Set the settings, run configure, set the settings, run configure, etc.
| |
| * Repeat until all values are set and the generate option is available (g key).
| |
| * Some variables (advanced variables) are not visible right away.
| |
| * To see advanced varables, toggle to advanced mode (t key).
| |
| * To set a variable, move the cursor to the variable and press enter.
| |
| ** If it is a boolean (ON/OFF) it will flip the value.
| |
| ** If it is string or file, it will allow editing of the string.
| |
| ** For file and directories, the <nowiki><tab></nowiki> key can be used to complete.
| |
| * To search for a variable press '/' key; to repeat the search, press the 'n' key.
| |
| </div>
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #c6c9ff; color: #000; background-color: #f0f0ff"|
| |
| <div style="clear: right; text-align: left; float: right; padding: .4em .9em .9em">
| |
| | |
| ===On Windows===
| |
| * Use CMakeSetup from the CMake install location.
| |
| * Make sure to select the appropriate source and the build directory.
| |
| * Also, make sure to pick the appropriate generator (on Visual Studio 2013, pick the ''Visual Studio 12 2013'' generator). Some CMake versions will ask you to select the generator the first time you press Configure instead of having a drop-down menu in the main dialog.
| |
| [[Image:Brpv cmakesetup.png|400px]]
| |
| | |
| ===About CMakeSetup (Windows CMake GUI)===
| |
| | |
| * Iterative process.
| |
| ** Select values, press the Configure button.
| |
| ** Set the settings, run configure, set the settings, run configure, etc.
| |
| * Repeat until all values are set and the OK button becomes available.
| |
| * Some variables (advanced variables) are not visible right away.
| |
| * To see advanced varables, toggle to advanced mode ("Show Advanced Values" toggle).
| |
| * To set the value of a variable, click on that value.
| |
| ** If it is boolean (ON/OFF), a drop-down menu will appear for changing the value.
| |
| ** If it is file or directory, an ellipsis button will appear ("...") on the far right of the entry. Clicking this button will bring up the file or directory selection dialog.
| |
| ** If it is a string, it will become an editable string.
| |
| </div>
| |
| |}
| |
| | |
| ===ParaView Settings===
| |
| | |
| {| border="0" cellpadding="4" cellspacing="4"
| |
| |-
| |
| | bgcolor="#abcdef" height="8" | '''Variable'''
| |
| | bgcolor="#abcdef" height="8" | '''Description'''
| |
| |-
| |
| | BUILD_SHARED_LIBS || If ON, use shared libraries. This way executables are smaller, but you have to make sure the shared libraries are on every system on the cluster. This option should be set to ON if you plan on using plugins for ParaView (they are ways to use plugins in static builds of ParaView for advanced users).
| |
| |-
| |
| | BUILD_TESTING || If ON, tests will be built and related data downloaded. Unless you have a specific needs for this, it is recommended to set it to OFF to speed up the compilation.
| |
| |-
| |
| | PARAVIEW_USE_MPI || Turn this to ON to enable MPI. Other MPI options will not be available until you turn this on.
| |
| |-
| |
| | MPI_C_LIBRARIES || Paths to the MPI libraries (such as /usr/lib/libmpi.so). Should be found by default, but you may have to set it. Certain mpi implementations need more than one library. All the libraries can be specified by separating them with a ';'. (see the note below)
| |
| |-
| |
| | MPI_C_INCLUDE_PATH || Path to MPI includes (such as /usr/include/mpi). Again, this should be found by default.
| |
| |-
| |
| | PARAVIEW_ENABLE_PYTHON || Makes Python client scripting and the Python programmable filter available. You will also need to setup the following variables:
| |
| |-
| |
| | || PYTHON_LIBRARY: Should point to your python*.lib file. For example on Windows: C:/Python27/libs/python27.lib
| |
| |-
| |
| | || PYTHON_INCLUDE_DIR: Should point to the include directory inside your Python installation. For example on Windows: C:/Python27/include
| |
| |-
| |
| | || PYTHON_EXECUTABLE: Should point to the python executable file. For example on Windows: C:/Python27/python.exe
| |
| |-
| |
| | PARAVIEW_BUILD_QT_GUI || Flag to enable/disable the building of the ParaView Qt-based client. This option is useful when building ParaView on server nodes or when we are only interested in the Python client, as it avoids building of the Qt client thus does not require Qt. ON by default.
| |
| |-
| |
| | PARAVIEW_QT_VERSION || Make sure it is set to the major version of Qt you are using.
| |
| |-
| |
| | Qt5_DIR || Path to the directory of Qt5 containing the description of Qt5 installation on this computer via Qt5Config.cmake. On a windows binary version of Qt it may be in C:\Qt\Qt5.6.2\5.6\msvc2013_64\lib\cmake\Qt5
| |
| |-
| |
| | QT_QMAKE_EXECUTABLE || Path to Qt's qmake executable (such as /usr/local/bin/qmake). CMake uses this to locate the rest of the required Qt executables, headers and libraries. Only with Qt4.
| |
| |-
| |
| | PARAVIEW_ENABLE_FFMPEG || Enable FFMPEG support (UNIX only)
| |
| |-
| |
| | PARAVIEW_USE_VISITBRIDGE || Enable VisItBridge that adds support for additional file formats (requires Boost)
| |
| |}
| |
| | |
| '''Note for MPI settings:''' If your MPI variables aren't set automatically (usually the case if the compiler wrapper [mpicxx] is not in the path or in some standard directory), toggle advanced options and set MPI_COMPILER variable to the full path of your mpi compiler (usually mpicxx), and configure. This should set all the required MPI variables. If not, then you might need to enter them manually. <br> If you get an error such as "mpi.h: no such file or directory" then set the CMAKE_C_FLAGS= -lmpi and the CMAKE_CXX_FLAGS= -lmpi++ . This is in addition to the MPI variables.
| |
| | |
| ===Finish Configuring ParaView===
| |
| | |
| {| cellspacing="3"
| |
| |- valign="top"
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #ffc9c9; color: #000; background-color: #fff3f3"|
| |
| <div style="padding: .4em .9em .9em">
| |
| ====Using CCMake====
| |
| | |
| * Once all configuration options are set, you should be able to just run <nowiki><generate></nowiki> (g key).
| |
| | |
| </div>
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #c6c9ff; color: #000; background-color: #f0f0ff"|
| |
| <div style="clear: right; text-align: left; float: right; padding: .4em .9em .9em">
| |
| ====Using CMakeSetup====
| |
| * Once all configuration options are set, you should be able to just run <nowiki><generate></nowiki>.
| |
| </div>
| |
| |}
| |
| | |
| ==Build ParaView==
| |
| | |
| You can now build ParaView using the appropriate build system.
| |
| | |
| Some considerations about the size of the final build (measuring the folders size after compiling with Visual Studio 2010):
| |
| * '''Total "Build" folder's size:''' 7.1 GB
| |
| * '''Total "Build/bin/Debug" folder's size:''' 1.8 GB
| |
| * '''Total "Build/bin/Release" folder's size:''' 96 MB (as you are developing plugins it is recommended to build for Debug though)
| |
| | |
| | |
| {| cellspacing="3"
| |
| |- valign="top"
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #ffc9c9; color: #000; background-color: #fff3f3"|
| |
| <div style="padding: .4em .9em .9em">
| |
| ===Using Make===
| |
| CMake will now generate Make files. These make files have all dependencies and all rules to build ParaView on this system. You should not however try to move the build directory to another location on this system or to another system.
| |
| | |
| Once you have makefiles you should be able to just type:
| |
| | |
| make
| |
| | |
| * If you are on multi-processor system (let's say four processor), you can type:
| |
| | |
| make -j 4
| |
| | |
| [[Image:Brpv make.png|400px]]
| |
| | |
| </div>
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #c6c9ff; color: #000; background-color: #f0f0ff"|
| |
| <div style="clear: right; text-align: left; float: right; padding: .4em .9em .9em">
| |
| | |
| ===Using Visual Studio===
| |
| *CMake will now create Visual Studio project files. Before you open Visual Studio, be sure that the Qt .dlls are in your path.
| |
| *You should now be able to open the '''ParaView''' project (or workspace) file, CMake GUI also provide a bouton to autmatically open the project. Make sure to set the build type is set to '''Debug''' (you can also set it to "Release" but it's recommended to use "Debug" as it will give you more information in case of errors, while on "Release" Paraview it will be harder to figure out problems).
| |
| *To build ParaView, simply build the '''ALL_BUILD''' target (this may take more than 6 hours depending on the speed of the build machine).
| |
| | |
| [[Image:Brpv now be able to open the '''ParaView''' project (or workspace) file, CMake GUI also provide a bouton to autmatically open the project. Make sure to set the build type is set to '''Debug''' (you can also set it to "Release" but it's recommended to use "Debug" as it will give you more information in case of errors, while on "Release" Paraview it will be harder to figure out problems).
| |
| *To build ParaView, simply build the '''ALL_BUILD''' target (this may take more than 6 hours depending on the speed of the build machine).
| |
| | |
| [[Image:Brpv visualstudio71.png|400px]]
| |
| |}
| |
| | |
| ==Run ParaView from build==
| |
| | |
| You can now run ParaView before installing it
| |
| | |
| {| cellspacing="3"
| |
| |- valign="top"
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #ffc9c9; color: #000; background-color: #fff3f3"|
| |
| <div style="padding: .4em .9em .9em">
| |
| ===On Unix-like===
| |
| Once you have makefiles you should be able to just type:
| |
| | |
| ./bin/paraview
| |
| | |
| </div>
| |
| |width="50%" class="MainPageBG" style="border: 1px solid #c6c9ff; color: #000; background-color: #f0f0ff"|
| |
| <div style="clear: right; text-align: left; float: right; padding: .4em .9em .9em">
| |
| | |
| ===On Windows===
| |
| *Add QT binaries dir to your PATH environment variable, It could be C:\Qt\Qt5.6.2\5.6\msvc2013_64\bin
| |
| *restart Visual Studio
| |
| *Right-click on paraview project, set as Start-up project
| |
| *Right-click on paraview project -> Properties
| |
| *Configuration -> All Configuration
| |
| *Configuration Properties -> Debugging -> Environnement -> edit
| |
| *PATH=C:\Qt\Qt5.6.2\5.6\msvc2013_64\bin;%PATH%;
| |
| *Debug -> Start (Without) Debugging
| |
| *Or alternativelly, run paraview.exe in file explorer
| |
| |}
| |
| | |
| =Install ParaView=
| |
| | |
| ParaView can be run directly from the build directory. That said, for production environments, it should be installed in some system location.
| |
| | |
| For that purpose simply follow these instructions to install to an appropriate location. (these need to be updated for Windows). Note that ParaView is designed to <font color="brown">'''install what it builds'''</font>. Thus only the libraries and executables that ParaView builds are installed. For example, these instructions will not install Qt or ffmpeg libraries to the specified location. If you are interested in creating a binary package that is complete and can be distributed to other users/systems, you may want to refer to [[ParaView:Superbuild|ParaView Super-Build]].
| |
| | |
| ===CMake Variables===
| |
| | |
| Some of the CMake variables that affect installation rules are:
| |
| | |
| {| border="0" cellpadding="4" cellspacing="4"
| |
| |-
| |
| | bgcolor="#abcdef" height="8" | '''Variable'''
| |
| | bgcolor="#abcdef" height="8" | '''Value'''
| |
| | bgcolor="#abcdef" height="8" | '''Description'''
| |
| |-
| |
| | CMAKE_INSTALL_PREFIX
| |
| | <path>
| |
| | Set this to the root of the location where you want ParaView to be installed. Make sure this directory exists. For unix based systems and windows, ParaView will be installed under bin/ lib/ directories under this install prefix. '''This option is not available on Mac OSX'''.
| |
| |-
| |
| | CMAKE_BUILD_TYPE
| |
| | Release
| |
| | Unless you want to end up with debug install, set this to Release.
| |
| |-
| |
| | PARAVIEW_INSTALL_DEVELOPMENT_FILES
| |
| | OFF/ON
| |
| | To install development files, including headers, so that developers can build plugins/custom-applications using the installed version of ParaView, set this to ON. '''Currently, this option is not available on Mac OSX or Windows'''.
| |
| |-
| |
| | MACOSX_APP_INSTALL_PREFIX
| |
| | <path>
| |
| | Set this to the location where you want ParaView to install the app bundle on "make install". '''This option is only available on Mac OSX'''
| |
| |}
| |
| | |
| ===Installing===
| |
| Following the configuration, simply run 'make' to compile and build.
| |
| | |
| {| cellspacing="3"
| |
| |- valign="top"
| |
| |width="30%" class="MainPageBG" style="border: 1px solid #ffc9c9; color: #000; background-color: #fff3f3"|
| |
| <div style="padding: .4em .9em .9em">
| |
| ====On Unix-like operating systems:====
| |
| make install
| |
| | |
| This will install all the relevant files in directories under the CMAKE_INSTALL_PREFIX. The executables are installed in ${CMAKE_INSTALL_PREFIX}/bin and the libraries are installed in ${CMAKE_INSTALL_PREFIX}/lib/paraview-${major}.${minor}.
| |
| | |
| </div>
| |
| |width="30%" class="MainPageBG" style="border: 1px solid #c6c9ff; color: #000; background-color: #f0f0ff"|
| |
| <div style="clear: right; text-align: left; padding: .4em .9em .9em">
| |
| | |
| ====On Windows:====
| |
| *Right-click on INSTALL target -> Build
| |
| | |
| This will install all the relevant files in directories under the CMAKE_INSTALL_PREFIX. The executables are installed in ${CMAKE_INSTALL_PREFIX}/bin and the libraries are installed in ${CMAKE_INSTALL_PREFIX}/lib/paraview-${major}.${minor}.
| |
| </div>
| |
| | width="40%" class="MainPageBG" style="border: 1px solid #c6c9ff; color: #000; background-color: #d1f0e5"|
| |
| <div style="clear: right; text-align: left; padding: .4em .9em .9em">
| |
| | |
| ====On Mac:====
| |
| make install
| |
| | |
| This will create an app bundle in the directory specified by MACOSX_APP_INSTALL_PREFIX. This app bundle will have the main application executable under APP/Contents/MacOS, libraries under APP/Contents/Libraries, plugins under APP/Contents/Plugins, and additional executables such as the server executables and python executables under APP/Conents/bin.
| |
| </div>
| |
| |}
| |
| | |
| ==Notes on Mac OSX==
| |
| | |
| On Mac OSX, "'''make install'''" will install an app bundle to the location specified by MACOSX_APP_INSTALL_PREFIX. This app will contain all the ParaView libraries, plugins, python scripts, etc. that were built by ParaView. You can move this app around on the same machine like a regular app and it will work without any problems. Note, however, that this is not a redistributable app bundle. You cannot ship this off to your friend and expect it to work. This app does not include any *external dependencies*, such Qt libraries, or Python libraries, and has references to the versions that you used to build ParaView. This is not unique to Mac OSX, but to all other plaforms as well. "make install" is used to install runtimes to be used on the same machine. To generate redistributable packages, refer to [[ParaView:Superbuild|ParaView Super-Build]] instructions.
| |
| | |
| ==Miscellaneous Comments==
| |
| * Build trees of ParaView on non-Windows systems, always have RPATH information embedded in the binaries. When a make install is performed or CPACK is used, all RPATH information is stripped from the binaries in the install tree (expect for paths to external libraries). By default ParaView builds forwarding executables (launchers) that are installed in the bin directory. These binaries properly set up the environment to launch the equivalent executable in the lib/paraview-x.y directory.
| |
| * If you are compiling a MESA version of the ParaView server, start the server with the --use-offscreen-memory flag.
| |
| | |
| == Notes ==
| |
| === Environment Variables ===
| |
| | |
| If you build with shared libraries, you may have to add the Qt directory to you PATH environment variables to run ParaView. With Windows, one way to do so is to open up the environment variables dialog by clicking through '''Start'''|Control Panel|System|Advanced|Environment Variables. From that dialog, add a new user variable called PATH with a value of C:\Qt\5.6.2\bin. For other operating systems, add Qt/5.6.2/lib to your LD_LIBRARY_PATH environment variable.
| |
| | |
| =Frequently Asked Questions=
| |
| | |
| ===="make install" does not install ffmpeg and other libraries as it did with 3.14.1 and earlier. Is this a bug?====
| |
| | |
| This is a deliberate change. It was decided that ParaView should install only what it builds. Since ParaView doesn't build ffmpeg, it doesn't add install rules to install it. If you are interested in creating a package that includes all files ParaView depends on so that you can distribute to other, refer to
| |
| [[ParaView:Superbuild|ParaView Super-Build]]. That is supposed to do exactly that.
| |
| | |
| ====How do I generate a distributable ParaView package?====
| |
| | |
| Refer to [[ParaView:Superbuild | ParaView Super-Build]]. That is the process we use to generate the official binaries that are distributed on paraview.org. It streamlines the process of building all the depedencies for ParaView and then packaging them into installables or tarballs.
| |
| | |
| ====Do I need BUILD_SHARED_LIBS set to be ON if I want to enable Python scripting?====
| |
| | |
| No. In ParaView 3.14.1 and earlier, this was indeed the case, ParaView required that BUILD_SHARED_LIBS was ON if Python support was to be enabled. That is no longer the case. BUILD_SHARED_LIBS and PARAVIEW_ENABLE_PYTHON can now be managed independently.
| |
| | |
| | |
| | |
| | |
| | |
|
| |
|
| | '''To build ParaView complete with all the dependencies it needs and to package it, use the [https://gitlab.kitware.com/paraview/paraview-superbuild/-/blob/master/README.md?ref_type=heads paraview superbuild instructions].</font> |
|
| |
|
|
| |
|
| {{ParaView/Template/Footer}} | | {{ParaView/Template/Footer}} |