[Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2 64 bit

Tue Jan 5 11:38:55 EST 2010

Good! Thanks for trying that out for me! :-)

On Tue, Jan 5, 2010 at 11:36 AM, Pei-Ying Hsieh <phsieh2005 at yahoo.com>wrote:

> Hi, Dave,
>
> Yap, that did the trick!  Thanks!
>
> Pei
>
>  ------------------------------
> *From:* Dave Partyka <dave.partyka at kitware.com>
> *To:* Pei-Ying Hsieh <phsieh2005 at yahoo.com>
> *Sent:* Tue, January 5, 2010 11:11:14 AM
>
> *Subject:* Re: [Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2 64
> bit
>
> Hi Pei,
>
> Can you try removing /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1.
> If it is gone it should attempt to use your system version of libfontconfig.
>
> On Tue, Jan 5, 2010 at 10:45 AM, Pei-Ying Hsieh <phsieh2005 at yahoo.com>wrote:
>
>>  Hi, Dave,
>>
>> Thanks for looking into this.  I will try to compile qt-4.4.3 from source
>> to see if it resolve the issue.
>>
>> Outputs from gdb attached.
>>
>> Pei
>> ---------------------------------
>>
>> hsieh at saturn:~/paraview/paraview-3.6.2-Linux-x86_64> gdb ./bin/paraview
>>
>> GNU gdb (GDB) SUSE (6.8.91.20090930-2.4)
>>
>> Copyright (C) 2009 Free Software Foundation, Inc.
>>
>> License GPLv3+: GNU GPL version 3 or later <
>> http://gnu.org/licenses/gpl.html>
>>
>> This is free software: you are free to change and redistribute it.
>>
>> There is NO WARRANTY, to the extent permitted by law. Type "show copying"
>>
>> and "show warranty" for details.
>>
>> This GDB was configured as "x86_64-suse-linux".
>>
>> For bug reporting instructions, please see:
>>
>> <http://www.gnu.org/software/gdb/bugs/>...
>>
>> Reading symbols from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/bin/paraview...done.
>>
>> (gdb) run
>>
>> Starting program:
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/bin/paraview
>>
>> Missing separate debuginfo for /lib64/ld-linux-x86-64.so.2
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=591af1afa33f255704fb6a60859b93d00e205302"
>>
>> Missing separate debuginfo for /lib64/libc.so.6
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=c5a3dfd66bf61fcdec9bc22153b2fbd0d6697960"
>>
>> Executing new program:
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/paraview-real
>>
>>
>> Missing separate debuginfo for /lib64/ld-linux-x86-64.so.2
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=591af1afa33f255704fb6a60859b93d00e205302"
>>
>> Missing separate debuginfo for
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtAssistantClient.so.4
>>
>>
>> Missing separate debuginfo for
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>>
>> Missing separate debuginfo for /usr/lib64/libSM.so.6
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=51a2a639c0e174691e5fa6f5d648d835750bc44d"
>>
>> Missing separate debuginfo for /usr/lib64/libICE.so.6
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=43a0fa4cde51095b57558eb7ed0c90dd90e99fae"
>>
>> Missing separate debuginfo for /usr/lib64/libXi.so.6
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=d278c56b4359f6a219af5e13576873a38581c25c"
>>
>> Missing separate debuginfo for /usr/lib64/libXrender.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=55f90cfa8482fae594e59cce00c20937e7257446"
>>
>> Missing separate debuginfo for /usr/lib64/libXrandr.so.2
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=6a1fccee186ebf368f2d6a7d5ccd582943fd1953"
>>
>> Missing separate debuginfo for /usr/lib64/libXcursor.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=56d901d8946aefda2e4b5e12dba24c13ac3f61a9"
>>
>> Missing separate debuginfo for /usr/lib64/libXinerama.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=c7af2457b235b84f26ce24f1c4d260ec7eeb9f88"
>>
>> Missing separate debuginfo for /usr/lib64/libXfixes.so.3
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=6495446f04c2f9a4fa3021f7322d6f12c4017305"
>>
>> Missing separate debuginfo for
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1
>>
>>
>> Missing separate debuginfo for /usr/lib64/libXext.so.6
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=a14cd41f23af7f31d0ac2bd8eada730888690b27"
>>
>> Missing separate debuginfo for /usr/lib64/libX11.so.6
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=5fa84adc30db95abcbaea20ed7ec1c8dd94dfff2"
>>
>> Missing separate debuginfo for
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtXml.so.4
>>
>>
>> Missing separate debuginfo for
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtNetwork.so.4
>>
>>
>> Missing separate debuginfo for
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtCore.so.4
>>
>>
>> Missing separate debuginfo for /usr/lib64/libgthread-2.0.so.0
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=bf745d8917d27e255bf174e08e0e6775de77075b"
>>
>> Missing separate debuginfo for /usr/lib64/libglib-2.0.so.0
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=7e3842ab0a347df5f56a0697077f4eca83bfe5fe"
>>
>> Missing separate debuginfo for /lib64/librt.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=c663e79551b37d4c0c9bc93b252b917bfdedb150"
>>
>> Missing separate debuginfo for /lib64/libpthread.so.0
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=7bcbabc9da24424f1f5ef7be77b575fd3d796288"
>>
>> [Thread debugging using libthread_db enabled]
>>
>> Missing separate debuginfo for /lib64/libdl.so.2
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=44e66ebae672563bd496f290e08d316bc3bf0ac7"
>>
>> Missing separate debuginfo for
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtOpenGL.so.4
>>
>>
>> Missing separate debuginfo for /usr/lib64/libGLU.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=a76155345771ffa204fc8a1cf63b3eca7ce1ae86"
>>
>> Missing separate debuginfo for /usr/lib64/libGL.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=cb5a2f35ed226cb1c92f063d03b204ec24b100a6"
>>
>> Missing separate debuginfo for /lib64/libutil.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=c215c4e3a0ed0e0e78497c3d24f0066b913c7670"
>>
>> Missing separate debuginfo for /lib64/libm.so.6
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=57fc1891d8d9f419fb8c7fc06a8285563b53a47e"
>>
>> Missing separate debuginfo for
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtSql.so.4
>>
>>
>> Missing separate debuginfo for /usr/lib64/libXt.so.6
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=347ef3008674f3d1d19ccb0ec9236b5c6a51571f"
>>
>> Missing separate debuginfo for /lib64/libc.so.6
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=c5a3dfd66bf61fcdec9bc22153b2fbd0d6697960"
>>
>> Missing separate debuginfo for /lib64/libuuid.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=926afd158a155c4b03dd155013053efcaa53dba0"
>>
>> Missing separate debuginfo for /usr/lib64/libxcb.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=54a77c10d44b40080d6d8e65d277ccb7ab2a5b4a"
>>
>> Missing separate debuginfo for /lib64/libpcre.so.0
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=faf1aba9b565a29c99ce1d3944978347d6209cc3"
>>
>> Missing separate debuginfo for /usr/lib64/libXxf86vm.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=4ffef26febce96a31b2d5df10538bb6dba112e3b"
>>
>> Missing separate debuginfo for /usr/lib64/libXdamage.so.1
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=650d88fdf900daadd8ba1c9134c21b4e68b560bc"
>>
>> Missing separate debuginfo for /usr/lib64/libdrm.so.2
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=dc7d692fb4a36fa25fc513b2e36a614f5e4efc48"
>>
>> Missing separate debuginfo for /usr/lib64/libXau.so.6
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=72341bb9d8a1ad2ca2bbced007f3a785121aac28"
>>
>> Missing separate debuginfo for /usr/lib64/gconv/UTF-16.so
>>
>> Try: zypper install -C
>> "debuginfo(build-id)=4dc9c0aff44820b7b04b954c85dc3bd1a9060b2a"
>>
>> Program received signal SIGSEGV, Segmentation fault.
>>
>> 0x00007ffff548575a in FcLangSetHash () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1
>>
>> (gdb) bt
>>
>> #0 0x00007ffff548575a in FcLangSetHash () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1
>>
>> #1 0x00007ffff5486a10 in FcFontSetList () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1
>>
>> #2 0x00007ffff54871c2 in FcFontList () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libfontconfig.so.1
>>
>>
>> #3 0x00007ffff6b9b9f7 in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>>
>> #4 0x00007ffff6b9f86a in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>>
>> #5 0x00007ffff6ba3fa5 in QFontDatabase::load(QFontPrivate const*, int) ()
>> from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #6 0x00007ffff6bba74b in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>>
>> #7 0x00007ffff6bc1471 in QTextLine::layout_helper(int) () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>>
>> #8 0x00007ffff6bf2507 in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>>
>> #9 0x00007ffff6bf785c in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>>
>> #10 0x00007ffff6bf5cd3 in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>>
>> #11 0x00007ffff6bf6187 in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #12 0x00007ffff6bf63ef in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #13 0x00007ffff6bf649e in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #14 0x00007ffff6bf6739 in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #15 0x00007ffff6bf6ded in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #16 0x00007ffff6bd0034 in QTextDocument::documentLayout() const () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #17 0x00007ffff6bb0156 in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #18 0x00007ffff6bb0329 in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #19 0x00007ffff6bb4a40 in QTextControl::QTextControl(QObject*) () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #20 0x00007ffff6d8a68e in ?? () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #21 0x00007ffff6d8d754 in QTextEdit::QTextEdit(QWidget*) () from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libQtGui.so.4
>>
>> #22 0x00007ffff7ebfb6c in
>> pqConsoleWidget::pqImplementation::pqImplementation(pqConsoleWidget&) ()
>>
>> from
>> /home/hsieh/paraview/paraview-3.6.2-Linux-x86_64/lib/paraview-3.6/libpqWidgets.so
>>
>> #23 0x00000000009b9e90 in ?? ()
>>
>> #24 0x00000000097c157f in ?? ()
>>
>> #25 0x00000000009baa70 in ?? ()
>>
>> #26 0x00007ffff7e76000 in ?? ()
>>
>> ---Type <return> to continue, or q <return> to quit---
>>
>> #27 0x00000000009b9e90 in ?? ()
>>
>> #28 0x00000000005b18e0 in ?? ()
>>
>> #29 0x0000000000000001 in ?? ()
>>
>> #30 0x0000000000000000 in ?? ()
>>
>> (gdb) q
>>
>>
>>
>>  ------------------------------
>> *From:* Dave Partyka <dave.partyka at kitware.com>
>> *To:* Pei-Ying Hsieh <phsieh2005 at yahoo.com>
>> *Sent:* Tue, January 5, 2010 9:21:21 AM
>>
>> *Subject:* Re: [Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2
>> 64 bit
>>
>> Yeah, I am thinking there is either some sort of conflict or missing
>> library that I should package instead of using the system one. To run gdb:
>>
>> gdb  ./bin/paraview
>>
>> It should print some license information and then show a gdb prompt. At
>> the prompt type run and hit enter. It should print out a bunch of stuff and
>> mention the segfault. At the gdb prompt type bt. Then copy and paste all of
>> the gdb output, including anything that printed after you typed run, into an
>> email. Let me know if it doesn't work.
>>
>>
>>
>> On Tue, Jan 5, 2010 at 9:08 AM, Pei-Ying Hsieh <phsieh2005 at yahoo.com>wrote:
>>
>>>  Hi, Dave,
>>>
>>> Thanks for the quick reply.
>>>
>>> I have never used gdb before. How do I start?
>>>
>>> I just tried the same binary of paraview-3.6.2 on an openSUSE 11.1 x64
>>> workstation and it worked without a problem.  So, is it possible I have
>>> library (QT?) missing or impatible?
>>>
>>> Pei
>>>
>>>  ------------------------------
>>> *From:* Dave Partyka <dave.partyka at kitware.com>
>>> *To:* Pei-Ying Hsieh <phsieh2005 at yahoo.com>
>>> *Sent:* Tue, January 5, 2010 8:40:38 AM
>>>
>>> *Subject:* Re: [Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2
>>> 64 bit
>>>
>>> I don't see anything too fishy there. Do you mind running gdb and getting
>>> a backtrace where it segfaults? I have a Suse 11.1 x64 machine here and it
>>> doesn't crash on it. If you're not a gdb expert let me know.
>>>
>>>
>>>
>>> On Tue, Jan 5, 2010 at 7:59 AM, Pei-Ying Hsieh <phsieh2005 at yahoo.com>wrote:
>>>
>>>>  Hi, Dave,
>>>>
>>>> Attached is the log file when I issued: ./bin/paraview --ldd.  Thanks!
>>>>
>>>> Pei
>>>>
>>>>  ------------------------------
>>>> *From:* Dave Partyka <dave.partyka at kitware.com>
>>>> *To:* Pei-Ying Hsieh <phsieh2005 at yahoo.com>
>>>> *Cc:* paraview <paraview at paraview.org>
>>>> *Sent:* Tue, January 5, 2010 7:42:15 AM
>>>> *Subject:* Re: [Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2
>>>> 64 bit
>>>>
>>>> Hi Pei,
>>>>
>>>> Can you run ./bin/paraview --ldd and send the output?
>>>>
>>>> Thanks!
>>>>
>>>> On Tue, Jan 5, 2010 at 7:30 AM, Pei-Ying Hsieh <phsieh2005 at yahoo.com>wrote:
>>>>
>>>>>  Dear paraview developers/users:
>>>>>
>>>>> I just downloaded the binary version of paraview-3.6.2 for linux 64.
>>>>> When I tried to run it, I got "segmentation fault".
>>>>>
>>>>> The binary version of paraview-3.6.1 runs fine.
>>>>>
>>>>> Any suggestion?
>>>>>
>>>>> Thanks!
>>>>>
>>>>> Pei
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Powered by www.kitware.com
>>>>>
>>>>> Visit other Kitware open-source projects at
>>>>> http://www.kitware.com/opensource/opensource.html
>>>>>
>>>>> Please keep messages on-topic and check the ParaView Wiki at:
>>>>> http://paraview.org/Wiki/ParaView
>>>>>
>>>>> Follow this link to subscribe/unsubscribe:
>>>>> http://www.paraview.org/mailman/listinfo/paraview
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20100105/1cb52eea/attachment-0001.htm>