[Paraview] Table to structured grid

[Cory Quammen]

Ooops, I misread your email. The extent for a 20 x 20 x 20 grid should be

0 19
0 19
0 19

The physical spacing is irrelevant for determining the extent because
the extent defines the logical coordinates (3D indices) of the grid
points and doesn't have anything to do with the physical size of the
grid.

HTH,
Cory

On Mon, Oct 31, 2016 at 2:19 PM, Vaibhav Agrawal
<vaibhav.agrawal at postgrad.curtin.edu.au> wrote:
> Hi Cory,
> Thanks for the reply.
> I have tried using the whole extent as suggested by you, still the same error.
>
> ERROR: In C:\DBD\pvs-x64\paraview\src\paraview\VTK\Common\ExecutionModel\vtkExecutive.cxx, line 784
> vtkPVCompositeDataPipeline (000000000AF33540): Algorithm vtkTableToStructuredGrid(000000000BF55670) returned failure for request: vtkInformation (0000000009D183C0)
>   Debug: Off
>   Modified Time: 4102985
>   Reference Count: 1
>   Registered Events: (none)
>   Request: REQUEST_DATA
>   ALGORITHM_AFTER_FORWARD: 1
>   FORWARD_DIRECTION: 0
>   FROM_OUTPUT_PORT: 0
>
> Thanks and Regards
> Vaibhav Agrawal
> PhD | Department of Chemical Engineering
> Faculty of Science and Engineering
>
> Curtin University
> Mobile | +61451818978
> Email | Vaibhav.Agrawal at postgrad.curtin.edu.au
> Web | http://curtin.edu.au
>
>
>
> Curtin University is a trademark of Curtin University of Technology.
> CRICOS Provider Code 00301J (WA), 02637B (NSW)
>
> -----Original Message-----
> From: Cory Quammen [mailto:cory.quammen at kitware.com]
> Sent: Tuesday, 1 November 2016 02:06
> To: Vaibhav Agrawal <vaibhav.agrawal at postgrad.curtin.edu.au>
> Cc: paraview at paraview.org
> Subject: Re: [Paraview] Table to structured grid
>
> Try setting your whole extent to
>
> 0                              19
> 0                              19
> 0                              34
>
> HTH,
> Cory
>
> On Mon, Oct 31, 2016 at 1:43 PM, Vaibhav Agrawal <vaibhav.agrawal at postgrad.curtin.edu.au> wrote:
>> Hi Paraview,
>>
>> I have a range of scalar data distributed over space domain. The space
>> domain of 20 cm X 20 cm X 35 cm is divided into 20 X 20 X 20 cells in
>> x-, y-, and z direction. I am trying to read the data in Paraview
>> using “Table to structured grid filter”.
>>
>> I have followed the following procedure:
>>
>> 1)      Open the csv file in paraview, with default setting (Detect Numeric
>> Columns - ON, Use String Delimiter - ON, Have Headers - ON, Field
>> Delimiter Characters should be a comma - ',')
>>
>> 2)       Applied the “Table To Structured Grid” filter from “Filters/
>> Alphabetical/ Table To Structured Grid”. Following setting were
>> followed
>>
>> a.       Whole extent was defined as follows :
>>
>> 1                              20
>>
>> 1                              20
>>
>> 1                              35
>>
>> b.      Column with header ‘x’, ‘y’, and ‘z’ (column D-, E- and F- in csv
>> sheet) were defined as X, Y and Z coordinates in setting.
>>
>> 3)      Applied the filter.
>>
>>
>>
>> However, I am getting the following error
>>
>>
>>
>> ERROR: In
>> C:\DBD\pvs-x64\paraview\src\paraview\VTK\Common\ExecutionModel\vtkExec
>> utive.cxx,
>> line 784
>>
>> vtkPVCompositeDataPipeline (000000000BED29A0): Algorithm
>> vtkTableToStructuredGrid(000000000B6FE460) returned failure for request:
>> vtkInformation (000000000A86EE00)
>>
>> Debug: Off
>>
>> Modified Time: 2918770
>>
>> Reference Count: 1
>>
>> Registered Events: (none)
>>
>> Request: REQUEST_DATA
>>
>> ALGORITHM_AFTER_FORWARD: 1
>>
>> FORWARD_DIRECTION: 0
>>
>> FROM_OUTPUT_PORT: 0
>>
>>
>>
>> I guess this error is because I am unable to define properly the
>> “whole Extent” property.
>>
>> Can you please elaborate, what should be set as the “whole extent”
>> with the example of my csv file.
>>
>>
>>
>> I am attaching the csv file for your reference.
>>
>>
>>
>>
>>
>> Thanks and Regards
>>
>> Vaibhav Agrawal
>> PhD | Department of Chemical Engineering
>>
>> Faculty of Science and Engineering
>>
>> Curtin University
>> Mobile | +61451818978
>> Email | Vaibhav.Agrawal at postgrad.curtin.edu.au
>> Web | http://curtin.edu.au
>>
>>
>> Curtin University is a trademark of Curtin University of Technology.
>> CRICOS Provider Code 00301J (WA), 02637B (NSW)
>>
>>
>>
>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Search the list archives at: http://markmail.org/search/?q=ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://public.kitware.com/mailman/listinfo/paraview
>>
>
>
>
> --
> Cory Quammen
> Staff R&D Engineer
> Kitware, Inc.



-- 
Cory Quammen
Staff R&D Engineer
Kitware, Inc.