[Paraview] Table to structured grid

[Vaibhav Agrawal]

Hi Cory,
Thanks for the reply.
I have tried using the whole extent as suggested by you, still the same error.

ERROR: In C:\DBD\pvs-x64\paraview\src\paraview\VTK\Common\ExecutionModel\vtkExecutive.cxx, line 784
vtkPVCompositeDataPipeline (000000000AF33540): Algorithm vtkTableToStructuredGrid(000000000BF55670) returned failure for request: vtkInformation (0000000009D183C0)
  Debug: Off
  Modified Time: 4102985
  Reference Count: 1
  Registered Events: (none)
  Request: REQUEST_DATA
  ALGORITHM_AFTER_FORWARD: 1
  FORWARD_DIRECTION: 0
  FROM_OUTPUT_PORT: 0

Thanks and Regards
Vaibhav Agrawal
PhD | Department of Chemical Engineering
Faculty of Science and Engineering

Curtin University
Mobile | +61451818978
Email | Vaibhav.Agrawal at postgrad.curtin.edu.au 
Web | http://curtin.edu.au



Curtin University is a trademark of Curtin University of Technology. 
CRICOS Provider Code 00301J (WA), 02637B (NSW)

-----Original Message-----
From: Cory Quammen [mailto:cory.quammen at kitware.com] 
Sent: Tuesday, 1 November 2016 02:06
To: Vaibhav Agrawal <vaibhav.agrawal at postgrad.curtin.edu.au>
Cc: paraview at paraview.org
Subject: Re: [Paraview] Table to structured grid

Try setting your whole extent to

0                              19
0                              19
0                              34

HTH,
Cory

On Mon, Oct 31, 2016 at 1:43 PM, Vaibhav Agrawal <vaibhav.agrawal at postgrad.curtin.edu.au> wrote:
> Hi Paraview,
>
> I have a range of scalar data distributed over space domain. The space 
> domain of 20 cm X 20 cm X 35 cm is divided into 20 X 20 X 20 cells in 
> x-, y-, and z direction. I am trying to read the data in Paraview 
> using “Table to structured grid filter”.
>
> I have followed the following procedure:
>
> 1)      Open the csv file in paraview, with default setting (Detect Numeric
> Columns - ON, Use String Delimiter - ON, Have Headers - ON, Field 
> Delimiter Characters should be a comma - ',')
>
> 2)       Applied the “Table To Structured Grid” filter from “Filters/
> Alphabetical/ Table To Structured Grid”. Following setting were 
> followed
>
> a.       Whole extent was defined as follows :
>
> 1                              20
>
> 1                              20
>
> 1                              35
>
> b.      Column with header ‘x’, ‘y’, and ‘z’ (column D-, E- and F- in csv
> sheet) were defined as X, Y and Z coordinates in setting.
>
> 3)      Applied the filter.
>
>
>
> However, I am getting the following error
>
>
>
> ERROR: In
> C:\DBD\pvs-x64\paraview\src\paraview\VTK\Common\ExecutionModel\vtkExec
> utive.cxx,
> line 784
>
> vtkPVCompositeDataPipeline (000000000BED29A0): Algorithm
> vtkTableToStructuredGrid(000000000B6FE460) returned failure for request:
> vtkInformation (000000000A86EE00)
>
> Debug: Off
>
> Modified Time: 2918770
>
> Reference Count: 1
>
> Registered Events: (none)
>
> Request: REQUEST_DATA
>
> ALGORITHM_AFTER_FORWARD: 1
>
> FORWARD_DIRECTION: 0
>
> FROM_OUTPUT_PORT: 0
>
>
>
> I guess this error is because I am unable to define properly the 
> “whole Extent” property.
>
> Can you please elaborate, what should be set as the “whole extent” 
> with the example of my csv file.
>
>
>
> I am attaching the csv file for your reference.
>
>
>
>
>
> Thanks and Regards
>
> Vaibhav Agrawal
> PhD | Department of Chemical Engineering
>
> Faculty of Science and Engineering
>
> Curtin University
> Mobile | +61451818978
> Email | Vaibhav.Agrawal at postgrad.curtin.edu.au
> Web | http://curtin.edu.au
>
>
> Curtin University is a trademark of Curtin University of Technology.
> CRICOS Provider Code 00301J (WA), 02637B (NSW)
>
>
>
>
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at 
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Search the list archives at: http://markmail.org/search/?q=ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://public.kitware.com/mailman/listinfo/paraview
>



--
Cory Quammen
Staff R&D Engineer
Kitware, Inc.